www.e-switch.com info @ e-switch.com 127 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options series 200 switches specifications subject to change without notice. example ordering number 200 _ msp1 _ t4 _ b5 _ m1 _ r _ e _ h toggle switches - sub miniature specifications contact rating: dependent upon contact material life expectancy: 30,000 make-and-break cycles at full load contact resistance: 20 m max. typical initial @ 2-4 vdc 100 ma for both silver and gold plated contacts insulation resistance: 1,000 m min. dielectric strength: 1,000 v rms @ sea level operating temperature: -30 c to 85 c materials case: diallyl phthalate (dap) or glass filled nylon (ul94-v0) toggle handle: brass, chrome plated bushing: brass, nickel plated housing: stainless steel switch support: brass, tin plated contacts / terminals: silver or gold plated copper alloy how to order features & benefits variety of switching functions sub-miniature multiple actuator & bushing options applications/markets telecommunications instrumentation networking medical equipment *msp6 - not available with m1, m6 & m7 termination series 200 t1 t2 t3 t4 t5 actuator m1 m2 m6 m7 vs2 termination q = silver r = gold contact material h = hardware hardware seal e e = epoxy sealed at base of terminal b1 b2 b3 b4 b5 b6 b7 b8 bushing msp1 msp2 msp3 msp4 msp5 msp6* mdp1 mdp2 mdp3 model no. pos 1 pos 2 pos 3 epoxy seal spdt ( ) = momentary pos 1 pos 2 pos 3 model no. msp-1 on none on msp-2 on none (on) msp-3 on off on msp-4 (on) off (on) msp-5 on off (on) term. comm. 2 - 3 open 2 - 1 msp-6 off none on term. comm. open none 3 -1 schematic
pos 1 pos 2 pos 3 epoxy seal dpdt * actuator shown with b1, b2, b3, or b4 bushing; subtract 0.09 (2.29) for b5, b6 bushing. subtract 0.040 (1.02) for b7, b8 bush ing. ** actuator shown with b5, b6 bushing; add 0.09 (2.29) for b1, b2, b3, and b4 bushing. add 0.50 (1.27) for b7, b8 bushing. ( ) = momentary pos 1 pos 2 pos 3 model no. mdp-1 on none on mdp-2 on none (on) mdp-3 on off on term. comm. 2-3, 5-6 open 2-1, 5-4 schematic actuator options t2 t1 t3* t5** t4** phone: 800-867-2717 fax: 763-531-8235 128 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options series 200 switches toggle switches - sub miniature panel mounting without locking ring with std. locking ring 10-48 bushing 1/4 in. bushing without locking ring with std. locking ring
www.e-switch.com info @ e-switch.com 129 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options bushing options thd b1 non-thd b2 thd b5 non-thd b6 thd b3 non-thd b4 thd b7 non-thd b8 termination options spdt m1 spdt m2 dpdt m1 dpdt m2
m7 m6 m6 m7 spdt dpdt spdt dpdt p.c. mounting p.c. mounting p.c. mounting p.c. mounting phone: 800-867-2717 fax: 763-531-8235 130 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options series 200 switches toggle switches - sub miniature
www.e-switch.com info @ e-switch.com 131 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options vs2 vs2 spdt dpdt p.c. mounting p.c. mounting contact material options q r fixed terminal: silver plated copper alloy moving contact: silver plated copper alloy rating: 3 amps @ 120 vac or 28 vdc; 1 amp @ 250 vac fixed terminal: copper alloy with gold plate over nickel plate moving contact: copper alloy with gold plate over nickel plate rating: 0.4 va max. @ 20 vac or dc max. lock washer hdw22 nut hdw21 hardware 8.08 7.00 10-48 uns 1.32
|